User's Manual

ENGLISH
54
3.
Click "NEXT", then "FINISH" button on the below window.
4.
Click "FINISH" button on
the right window to finish
installingthe program and
reboot your PC automatically.
5.
After rebooting PC, connect the player to the USB port of your PC and
turn on the player by pressing "▶ /■ " buttons.
6.
If you turn on the player, "READY" is displayed on the LCD and the
"New Hardware Found" window appears as shown below.
(The window may be slightly different from Windows versions.)
7.
If you continue with your installation after the "New Hardware Found" window
displayed in the previous step, the following message windows appear on
Windows 2000 and Windows XP.
Click "Yes" or "Continue” button to continue with your installation when the
above windows appear.
If you click "Stop Installing", your installation will not be completed.
[The above windows will be also displayed when installing other programs.
Continue with your installation. The installation procedure has been tested
and verified.]
8.
If the above steps are completed normally, the player has been installed
properly.Now, run Windows Explorer, there are two removable disks in
Windows Explorer.
In Windows 2000
In Windows XP
NOTE
No shortcut icon will be created on Windows
desktop after installing the program.