User's Manual

5. When formatting is completed, press the 'Close' button to close the formatting window. [fig-e14]
6. After formatting, disconnect the product from your PC and put the battery in it. Then press the '▶/■
' button and check if the power is on before you connect it to your PC again to use.
◎ Updating (After installing the program)
1. Update the firmware of the product.
2. With the battery removed from the product, connect the product to the USB port of your PC and press
the '▶/■' button for more than 10 seconds.
3. When the “Found New Hardware Wizard” appears as shown below, click "Next" → "Finish". [fig-e15]
[fig-e16]
4. After installation is completed, check if there is 'Player Recovery Device Class' in the device
controller. (Device controller : My Computer → View system information → Hardware → Device
Manager) [fig-e17]