User's Manual

Using the Software (After Installation)

■ Formatting the Removable Disk

1. These steps are for formatting the removable disk. Formatting will erase all the files on the

removable disk and initialize it for use.

2. With the battery installed in the device, connect the device to the USB port on your PC, and then

press the >> button to power on the device.

3. Double-click on the Music Box Explorer icon on our Desktop to launch the program.

4. Click on the FORMAT icon. When the Format confirmation dialog box appears, click "OK". Then

click "Start" to begin formatting.

5. When the formatting is complete, click "Close" to finish.

6. To use the program again, disconnect the USB cable from the device, wait 10 seconds, and then

reconnect the USB cable to the device. When the "READY" message appears on the LCD, you can

launch the program by double-clicking on the Music Box Explorer icon on your Desktop. If you do not

disconnect and reconnect the USB cable, the program will not run.

7. Always use the Format utility if you want to wipe out all the files on the removable disk. Periodically

format the removable disk to maintain reliability.

■ Updating the Firmware

1. These steps are for updating the firmware on the device.

2. With the battery installed in the device, connect the device to the USB port on your PC, and then

press the >> button to power on the device.

3. When the "READY" message appears on the LCD, double-click on the Music Box Explorer icon on

your Desktop to launch the program.

4. Click on the UPDATE icon. When the Firmware Update confirmation dialog box appears, click "OK".

Then click "Start" to begin the update.

5. When the update is complete, click "Close" to finish.

6. To use the program again, disconnect the USB cable from the device, wait 10 seconds, and then

reconnect the USB cable to the device. When the "READY" message appears on the LCD, you can

launch the program by double-clicking on the Music Box Explorer icon on your Desktop. If you do not

disconnect and reconnect the USB cable, the program will not run.

Downloading Files to the Device

1. With the battery installed in the device, connect the device to the USB port on your PC, and then

press the >> button to power on the device.

2. When the "READY" message appears on the LCD, double-click on the Music Box Explorer icon on

your Desktop to launch the program. The files on the internal memory of the device will be displayed

on the upper pane of the right side of the interface, and the files on a SmartMedia card (optional) will

be displayed on the lower pane.

3. Click on the MP3 icon to search for MP3 files on your PC.