Installation Sheet

MODEL AH REAR VIEW

Connect dishmachine to hot water source

recommended 140

temperature (120

minimum temperature required).

STEP

Connect the drain pipe from scrap

accumulator to floor or wall drain.

STEP

WALL

DRAIN

FLOOR DRAIN

Insert tube stiffener with chemical tubing

into each corresponding chemical

dispensers.

BLUE

RED

WHITE

STEP

TUBE

STIFFENER

AUTO START

SWITCH

POWER SWITCH

2" DRAIN

OUTLET

CHEMICAL

TUBING

3/4" WATER

INLET

HARD WIRE

POWER SUPPLY

7-1/2"

11"

WARNING: Electrical and plumbing connections

need to be made by a licensed service person

and comply with all Federal, State and Local

Health, Electrical, Plumbing and Safety codes.

11-2016

Models AH, C, B,

CB and Scullery B

Quick Setup

Instructions

PN: 10130.07

PAGE 1
Models AH, C, B, CB and Scullery B Quick Setup Instructions WARNING: Electrical and plumbing connections need to be made by a licensed service person and comply with all Federal, State and Local Health, Electrical, Plumbing and Safety codes.
PAGE 2
Models AH, C, B, CB and Scullery B Quick Setup 5 Instructions MODEL AH FRONT VIEW PRIMER SWITCHES WARNING: Electrical and plumbing connections need to be made by a licensed service person and comply with all Federal, State and Local Health, Electrical, Plumbing and Safety codes. PERISTALTIC PUMP FILL/START SWITCH 6 DOOR HANDLE 7 STEP 4 Level dishmachine by adjusting leveling legs. Dishmachine must be level front and back to ensure proper performance.