User`s manual

4 Basic Operation

The【SHIFT】button：

z Press and hold the【SHIFT】button then press the【OCTAVE/TRANSPOSE】

button for the transpose function.

z Press the【SHIFT】button to make it light on, the keyboard is switched to the

keyboard function mode.

【Data dial】and the【EXIT/ENTER】button：

z By default the data dial is used to change the voice#. When you reach the

desired voice#, press【ENTER】 to send the MIDI data. You can also press

【EXIT】 to cancel the voice# change.

z In the keyboard function mode, you can also use【Data dial】and【EXIT/ENTER】

to change the parameters.