User`s manual

7.4 Temperament

z You can change the temperament other than the defult equal one.

z Operation：【SHIFT】ÖA1

【Temperament】Ö【Set value】Ö【ENTER】

z Default value：000

z Value range：000-012

z Please refer to the appendix <Temperament list> for more information.

The Scale and Temperament functions can not be used at the same time.

When the temperament function is enabled, the keyboard will be in mono

mode.

7.5 Drawbar

z While playing a organ voice, you can use the Drawbar function to make the 9 faders

work as the organ drawbars (data value will be sent reversely), so you can control

the organ voice conveniently.

z Operation：【SHIFT】ÖF#1

【Drawbar】Ö【Set value】Ö【ENTER】

z Default value：

Off

z Value range：Off、On

7.6 Tempo

z By using the TEMPO function, you can send the TEMPO change data to control the

TEMPO of the external sequencer.

z Operation：【SHIFT】ÖG1

【Tem po】Ö【Set value】Ö【ENTER】

z Default value：Off

z Value range：Off, 30-250

If the external sequencer does not accept the Tempo change data, or it is not

properly configured, the Tempo function will not work.

7.7 MIDI Reset Message

z You can reset the external MIDI device by sending a MIDI reset message.

Name Key MIDI message sent

Reset All Control D3 CC#121

GM On D#3 F0 7E 7F 09 01 F7

GM2 On E3 F0 7E 7F 09 03 F7

GS On F3 F0 41 10 42 12 40 00 7F 00 41 F7

XG On F#3 F0 43 10 4C 00 00 7E 00 F7

CME On G3 F0 00 20 63 00 00 00 00 7F F7

Please make sure your MIDI device support the related MIDI reset message

before using this function.