Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
102
Note:
In the <text
> field, special characters like the following may appear:
`"` (0x22), `@` (0x00), `ò` (0x08), `Ö` (0x5c).
(See also AT+CPBW and
Appendix A: “How to use special characters in certain commands ( e. g.,
AT+CPBW”)
AT^SDLD
AT^SDLD Delete the ”last number redial” memory
Test command Response:
AT^SDLD=?
OK/ERROR/+CME ERROR
Execute command Response:
AT^SDLD
OK/ERROR/+CME ERROR
AT^SDLY
AT^SDLY Delay Command
Test command Response:
AT^SDLY=?
OK/ERROR/+CME ERROR
Write command Response:
AT^SDLY =<n>
OK/ERROR/+CME ERROR
Parameter:
<n
>
Time (in tenth of second) until OK is returned
e.g. <n
>= 10 corresponds to 1 second
Remark:
This command implements a delay for the specified time.
AT^SGAUTH
AT^SGAUTH Select Type of Authentication for PPP connection
Test command Response:
AT^SGAUTH=?
^SGAUTH: (list of supported <auth
>s)
OK/ERROR/+CME ERROR
Parameter:
<auth
>
indicates type of supported authentication
0
none
1
PAP
2
CHAP
3
PAP and CHAP
Read command Response:
AT^SGAUTH?
^SGAUTH: <auth
>
OK/ERROR/+CME ERROR
Parameter:
<auth
>
See Test command
Write command
AT^SGAUTH =<auth>
Response:
OK/ERROR/+CME ERROR
Parameter:
<auth
>
See Test command
AT^SGDCONT
AT^SGDCONT Define PDP Context
Test command Response: