Specifications

AT command set for XX Siemens mobile phones and modems
__________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September.2004
103
AT^SGDCONT=?
^SGDCONT: (range of supported <cid
>s), <PDP_type>,,,(list of supported
<d_comp
>s), (list of supported <h_comp>s) [<CR><LF>
^SGDCONT: (range of supported <cid
>s), <PDP_type>,,,(list of supported
<d_comp
>s),(list of supported <h_comp>s)[...]]
OK/ERROR/+CME ERROR
Parameter:
<cid
>
numeric PDP Context Identifier
0
.. 4
Note:
The default context is not affected by the ATZ and
AT&F commands
<PDP_type
>
string parameter of Packet Data Protocol type
PPP
Type PPT
IP
Type IP
<d_comp
>
numeric parameter that controls PDP data compression
0
off
<h_comp
>
numeric parameter that controls PDP header compression
0
off
Read command Response:
AT^SGDCONT?
^SGDCONT: <cid
>, <PDP_type>, <APN>,<PDP_addr>, <d_comp>,
<h_comp
> [<CR><LF>
^SGDCONT: <cid
>, <PDP_type>, <APN>,<PDP_addr>, <d_comp>,
<h_comp
>[...]]
OK/ERROR/+CME ERROR
Parameter:
<cid>
See Test command
<PDP_type>
See Test command
<APN>
string parameter for Access Point Name
<PDP_addr>
string parameter in IP V4 address notification
<d_comp>
See Test command
<h_comp>
See Test command
Write command
AT^SGDCONT=[<cid> [,<PDP_type> [,<APN> [,<PDP_addr> ]]]]
Response:
OK/ERROR/+CME ERROR
Parameter
<cid>
See Test command
<PDP_type>
See Test command
<APN>
See Read command
<PDP_addr>
See Read command
AT^SGDV
AT^SGDV GPRS data volume
Test command Response:
AT^SGDV=?
^SGDV: (list of supported <n
>s)
OK/ERROR/+CME ERROR
Parameter:
<n
> 0
Reset GPRS data volume statistics
1
Get total amount of data (mobile)
Read command
Response
:
AT^SGDV?
^SGDV: <cid
>,<down>,<up>[<CR><LF>^SGDV:
<cid
>,<down>,<up>[..]]
OK/ERROR/+CME ERROR
Parameter