Specifications

AT command set for XX Siemens mobile phones and modems
__________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September.2004
111
MD
Last number redial memory in telephone device
ME
Telephone book in device
MS
Missed dialing numbers (unanswered calls)
ON
Own telephone numbers
OW
Own numbers
RC
ME Received Calls List
RD
Red book (all entries in ”CS” whose name portions have an
exclamation mark (‘!’) as their final character)
SD
Service dialing numbers
For detailed information on the telephone-book features see “
Appendix A”
Read command Response:
AT^SPBS?
^SPBS: <sto
>[,<used>,<total>]
OK/ERROR/+CME ERROR
Parameter:
<sto
>
See Test command
<used
>
integer type value indicating the number of used locations in
selected memory
<total
>
integer type value indicating the total number of locations in selected
memory
Write command Response
AT^SPBS=<sto>
OK/ERROR/+CME ERROR
Parameter:
<sto
>
See Test command
AT^SPIC
AT^SPIC Output PIN counter
Test command Response
AT^SPIC=?
^SPIC:(<fac
1>,<pin_attempts>,<puk_attempts>)[,(<fac2>,
<pin_attempts
>,<puk_attempts>)][,...]
OK/ERROR/+CME ERROR
Parameter:
<fac
>
Facility as described in AT+CLCK command
<pin_attempts
>
Number of attempts left to enter the PIN password via
AT+CLCK (or AT+CPIN).
<puk_attempts>
Number of attempts still available to enter the PUK
password
Write command Response:
AT^SPIC=<fac>
^SPIC: <pin_attempts
>,<puk_attempts>
OK/ERROR/+CME ERROR
Read command Response:
AT^SPIC?
^SPIC:
(<fac
1>,<pin_attempts>,<puk_attempts>),…,(<facX>,<pin_attempts
>,<puk_attempts>)
OK/ERROR/+CME ERROR
Execute command Response:
AT^SPIC
^SPIC: <n
>
OK/ERROR/+CME ERROR
Parameter:
<n
>
Number of attempts still available to enter the <passwd>.
Use the AT+CPIN? command to check which password is being
required.