Specifications

AT command set for XX Siemens mobile phones and modems
__________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September.2004
113
AT^SPST =?
^SPST: (list of supported <n
>s)
OK/ERROR/+CME ERROR
Write command
AT^SPST =<n>,<m>
Response:
OK/ERROR/+CME ERROR
Parame
ter:
<n
>
Type of Signal Tone (st = self terminating)
0
Carkit PTT (st)
1
Carkit PTT long (st)
2
Carkit Crash (st)
3
Carkit Error (st)
4
Carkit Call Setup (st)
<m
>
Mode
0
Stop tone (not necessary for self terminating tones)
1
Play tone
AT^SPTT
AT^SPTT Push To Talk (for BT Headset)
Test command Response:
AT^SPTT =?
OK/ERROR/+CME ERROR
Write command Response
AT^SPTT =<n>
OK/ERROR/+CME ERROR
Parame
ter:
<n
>
Key Press
0
Short key pressed
1
Long key pressed
AT^SPWD
AT^SPWD Change password to a lock (including user-defined locks)
Test command Response
AT^SPWD=?
^SPWD: list of supported (<fac
>, <pwdlength>)s
OK/ERROR/+CME ERROR
Parameter.
<fac
> P2
PIN2
PS
Phone locked to SIM (device code)
SC
SIM card (PIN)
AO
BAOC (bar all outgoing calls)
OI
BOIC (bar outgoing international calls)
OX
BOIC-exHC (bar outgoing international calls except to
home country)
AI
BAIC (bar all incoming calls)
IR
BIC-Roam (bar incoming calls when roaming outside
the home country)
AB
All barring services
AG
All outgoing barring services
AC
All incoming barring services
PN
Network personalization (GSM 02.22, [3])
PC
Corporate personalization (GSM 02.22, [3]
PU
Network subset personalization (GSM 02.22, [3]