Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
114
PP
Service provider personalization (GSM 02.22, [3])
PF
Phone locked to very first inserted SIM
<pwdlength
>
Length of password
Write command
AT^SPWD = <fac>,<oldpwd>, <newpwd>
Response:
OK/ERROR/+CME ERROR
Parameter
<fac
>
See Test command
<oldpwd
>
Old password
<newpwd
>
New password
AT^SQWE
AT^SQWE Switch Mode for External Interface
Test command Response:
AT^SQWE=?
^SQWE: (list of supported <mode
>s)
OK/ERROR/+CME ERROR
Parameter:
<mode
> 0
RCCP AT command mode without CSD
1
BFC Siemens specific data transfer mode
2
GIPSY Default mode, AT command mode with CSD
3
OBEX OBEX data transfer mode
Read command Response:
AT^SQWE=?
^SQWE: <mode>
OK
The Read command returns the actual setting for the <mode
> parameter.
Write command
AT^SQWE=<mode>
Response:
OK/ERROR
The Write command sets the mode for this interface (e.g. BT, IrDA, Wire)
AT^SRMP
AT^SRMP Ring Melody Playback
Test command Response
AT^SRMP=?
^SRMP: (list of supported <call type
>s),(list of supported <volume>s)
OK
Read command Response
AT^SRMP?
^SRMP: (<call type
1>,<volume1>s)[…]
[^SRMP: (<call type
x>,<volumex>s)]
OK
The Read command returns the volume set for each ring melody index.
Write command
^SRMP=<call type>[,<volume>]
Response:
^SRMP: <call type
>[,<volume>]
OK/ERROR/+CME ERROR
Parameter:
<call type
>
integer type parameter corresponding to different ring
melodies in mobile such as line1, line2, groups, Alarm, SMS,
CBS and others
<volume
>
integer type parameter with manufacturer specific range