Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
118
<date_time
>
string of format
yy-MM-dd,hh:mm:ss[±zz]
indicating year, month, day, hour, minutes, seconds and,
optionally, time zone (indicates the difference between the
local time and GMT, expressed in quarters of an hour, range -
47...+48)
E.g. "04-05-06,22:10:00+08" stands for
6th of May 2004, 22:10:00 GMT+2 hours
The Write command is used to control the Voice Memo functionality of the
mobile. The action parameter lets you start, stop, pause, or cancel a Voice
Memo playback. Also, this command can be used to start, stop, cancel and
pause the recording of a Voice Memo (see also section 4.4).
Read command Response:
^SVMC? ^SVMC: <type>,<time>
OK/ERROR/+CME ERROR>
Parameter:
<type
>
integer indicating the type of action being performed for a
voiced memo; the following values are defined
0
Idle
1
recording of voice memo
2
playback of voice memo
<time
>
see Test command
The Read command indicates whether a playback or recording is running
(type), the remaining time (recording time or playback time) and the name (if
available) of the current Voice Memo.
Execute command Response:
^SVMC ^SVMC: <type>,<time>
OK/ERROR/+CME ERROR
The Execute command controls the pausing of playback and recording. Each
time this command is executed there is a change between playback/record and
pause (see also section 4.4).
Unsolicited result code:
^SVMC: <event>
Parameter:
<event
>
0
Normal Stop
1
Memory failure (e.g. MMC removed)
2
Memory full
3
Incoming call
4
Warning: 5 seconds remaining for recording
5 – 254
not yet defined (reserved for later use)
255
Unknown event