Specifications

AT command set for XX Siemens mobile phones and modems
__________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September.2004
119
AT^STRC
AT^STRC Activate Universal Data Tracer
Test command Response:
AT^STRC=?
OK/ERROR/+CME ERROR
Write command
AT^STRC=<traceid> [,<serial>]
Response:
OK/ERROR
Parameter:
<traceid
>
enables a specific level of tracing e.g. RLP, PPP.
0 tracer disabled
1
2
3
4
5
6
7
<serial>
specifies the serial interface which should be used for
debug output.
0
1
This command can only be used if the RESI-SAP is activated in the mobile
device.
2.10 List of all Unsolicited result codes
Unsolicited result codes indicate that processing of actions currently running is aborted due to an unforeseen
event. Table 2-10 lists all unsolicited result codes defined, together with their meaning:
Message Meaning
+CBM: <length><CR><LF><pdu> Direct output of the broadcast message.
For an explanation of parameters see the
AT+CNMI command
+CCCM:<ccm> Indication that the <ccm> value has
changed but no more than every 10
seconds
+CCWA: <num>,<type>,<class>,,<cli
validity>,<alpha>,<line>
Call waiting indication
For an explanation of parameters see
AT+CCWA
+CDS: <length><CR><LF><pdu> Direct output of the status report
For an explanation of parameters see
AT+CNMI
+CDSI: <mem>,<index> Displays the status report index and
memory
For an explanation of parameters see the
AT+CNMI command
+CGEV: ME CLASS <class> The mobile equipment has forced a change
of MS class
For an explanation of parameters see