Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
122
3 Appendix A
3.1.1 Factory settings made by AT&F
Reset pending locks (Phone Pin/Puk, Pin2/Puk2 ...)
which are given as answer to AT+CPIN?
ATS0=0
ATS3=13
ATS4=10
ATS5=8
ATS7=60
ATV1
ATE1
ATQ0
AT\Q3
AT&C1
AT&D2
ATX0
AT+VTD=1
AT+CSCS="GSM"
AT+CMEE=0
AT+CLIP=0
AT+COLP=0
AT+CPBS=SM (if available)
AT^SCKS=0
AT^SACM=0
AT+CRC=0
AT+CAOC=0
AT^SACM=0
AT+CCWA=0
AT+CSSN=0,0
AT+CPOL=,2
AT+CMER=0,0,0,0,0
AT+CREG=0
AT+CMEC=0,0,0
AT+CRC=0
AT+COPS=0,0
The extended error report (AT+CEER) will be reset (0,0).
AT+CNMI=0,0,0,0,1
AT+CMPS=SM,SM,SM
AT^SMGO=0
AT+CSMS=0
AT+CSCB=0 (Toni bitte prüfen!!!)
If GPRS is supported, the following GPRS commands are affected as well:
AT+CGAUTO=0
AT+CR=0
AT+CGEREP=0,0
AT+CGREG=0