Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
124
FD)
AT^SPBG
RD Red book numbers
(CS entries with ! at the end of
the name portion)
Siemens
AT^SPBS,
AT^SPBC,
AT^SPBG
-
Table 3-1: Features of the telephone book memory
3.1.3 Writing to the FDN Phonebook / FDN Replacement
Writing to the fixed-dialing number phonebook is protected by PIN2. A sample Write sequence (to e.g. record 5)
is provided below:
AT Command Comment
AT+CMEE=2
OK
Activate expanded error message
AT+CPBS=?
+CPBS: (“FD”,”SM”,”LD”)
OK
Listing of available telephone books
AT+CPBS=”FD”
OK
Selection of the FDN telephone book
AT+CPBW=5,"1234",,”test”
+CME ERROR: SIM PIN2 REQUIRED
A Write to record 5 is attempted
PIN2 is required for this purpose
AT+CPIN?
+CPIN: SIM PIN2
Query of the PIN status
PIN2 is to be entered
AT+CPIN="12345678"
OK
Input of PIN2
AT+CPBW=5,"1234",,”test”
OK
A Write to record 5 is attempted...
PIN2 remains active as long as you use the commands
AT+CPIN, AT+CPBS, AT+CPBR, AT+CPBW, AT+CACM, AT+CAMM,
AT+CPUC or AT^SPIC, AT^SPBS, AT^SPBC, AT^SPBG,:
If you use other commands or if none of the above commands are executed
within five minutes, PIN2 is no longer valid.
AT+CPBW=6,"5678",,”new test”
OK
A Write to record 6 is attempted...
As of Rel. 99 there is an alternative way to insert PIN2 for FDN writing:
AT Command Comment
AT+CMEE=2
OK
Activate expanded error message
AT+CPBS=?
+CPBS: (“FD”,”SM”,”LD”)
OK
Listing of available telephone books
AT+CPBS=”FD”,”12345678”
OK
Selection of the FDN telephone book and provide PIN2 with the same command.
AT+CPBW=6,”5678”,,”new test”
OK
Record 6 is written...