Specifications

AT command set for XX Siemens mobile phones and modems
__________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September.2004
135
Meaning:
The voice memo stored with the index 2 is to be deleted.
Read command
The Read command indicates whether a playback or recording is running (type), the remaining time
(recording time or playback time) and the name (if available) of the current Voice Memo.
Sample input and resulting output:
AT^SVMC?
^SVMC: 0
Meaning:
Currently no action is performed for a voice memo, the value of <type> is “Idle”.
AT^SVMC?
^SVMC: 1,”00:10:00”
Meaning:
A voice memo is being recorded, with 10 minutes’ record time remaining
AT^SVMC?
^SVMC: 2,”00:00:30”
Meaning:
A voice memo is being played back, with 30 seconds remaining
Execute command
The Execute command controls the pausing of playback and recording. Each time this command is
executed there is a change between playback/record and pause.
Pause a recording or playback depending on the current running action. The following table shows the
possible response for the execution command:
State of VM-AL Command Response Meaning Next State
Recording ^SVMC: 0,”00:00:30” OK 30s are recorded ‘Pause Recording’
Pause Recording OK recording continued ‘Recording’
Playing ^SVMC: 1,”00:00:40” OK 40s are played ‘Pause Playing’
Pause Playing OK playback continued ‘Playing’
Other states ERROR
(+CME ERROR: operation
temporarily not allowed)