Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
136
5 Errors and Messages
This section provides information on the final result code of a command execution (+CMS ERROR: <err>) and
indicates an error related to mobile equipment or network.
5.1 Summary of CME ERRORS (+CME ERROR) related to 3GPP TS
27.007
Table 5-1 lists the numbers and meaning of CME errors (+CMS ERROR: <err>) related to 3GPP TS 27.007
[15].
Note: Values smaller than 256 are reserved.
Code of <err> Meaning
0
phone failure
1
no connection to phone
2
phone-adapter link reserved
3
Operation not allowed
4
Operation not supported
5
PH-SIM PIN required
6
PH-FSIM PIN required
7
PH-FSIM PUK required
10
SIM not inserted
11
SIM PIN required
12
SIM PUK required
13
SIM failure
14
SIM busy
15
SIM wrong
16
Incorrect password
17
SIM PIN2 required
18
SIM PUK2 required
20
Memory full
21
invalid index
22
not found
23
Memory failure
24
text string too long
25
invalid characters in text string
26
dial string too long
27
invalid characters in dial string
30
no network service
31
Network timeout
32
Network not allowed emergency calls only
40
Network personalization PIN required
41
Network personalization PUK required
42
Network subset personalization PIN required
43
Network subset personalization PUK required
44
service provider personalization PIN required
45
service provider personalization PUK required
46
Corporate personalization PIN required
47
Corporate personalization PUK required
100
Unknown