Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
142
17 Network failure
22 Congestion
48 – 63 Retry upon entry into new cell low – high
95 Message semantically incorrect
96 Mandatory information invalid
97 Message type does not exist or is not implemented
98 Message type incompatible with protocol state
99 Information element does not exist or is not implemented
100 Conditional error
101 Message incompatible with protocol state
111 Unspecified protocol error
Table 5-8: Return values issued by AT+CEER for GPRS Layer 3 Mobility Management
5.4.2 GSM return values issued by AT+CEER for Session Manager
Value Meaning
25 LLC or SNDCP failure
26 Insufficient resources
27 Missing or unknown APN
28 PDP address or type unknown
29 User authentication failed
30 Activation rejected by GGSN
31 Activation rejected for unspecified reason
32 Service option not supported
33 Requested service option not subscribed
34 Service option temporarily out of order
35 NSAPI already used
36 Regular deactivation
37 QoS not accepted
38 Network failure
39 Reactivation required
81 Invalid transaction identifier value
95 Message semantically incorrect
96 Mandatory information invalid
97 Message type does not exist or is not implemented
98 Message type incompatible with protocol state
99 Information element does not exist or is not implemented
100 Conditional IE error
101 Message incompatible with protocol state
111 Unspecified protocol error
Table 5-9: GMM return values issued by AT+CEER
5.4.3 Internal values of Session Manager issued by AT+CEER
Value Meaning
3 T3380 timer expired
4 DeactAct
5 DeactActReject