Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
144
5.5 List of keys implemented for AT+CKPD / AT^SKPD
The following keys are implemented for the AT+CKPD and AT^SKPD commands:
Character
(
AT+CKPD)
key value (dec)
(AT^SKPD)
Comment
# 35 Hash (number sign)
% 37 Percent sign
* 42 asterisk
0..9 48 .. 57 number keys
: Colon; escape character for manufacturer specific keys
< 61 Left arrow
> 62 Right arrow
C/c 10 clear display (C/CLR)
E/e 12 connection end (END)
F/f 26 Navi centre
S/s 11 connection start (SEND)
V/v 14 Down arrow
W/w pause character
Y/y 9 delete last character (C)
[ 1 soft key 1
] 4 soft key 2
^ 59 Up arrow
Siemens specific keys
+ left side key up
- left side key down
M right side key
O/o short key
X/x Hexanumeric string of all Siemens Keys
5.6 Use of Siemens specific Key O/o
“:” following the CKPD command indicates the use of manufacturer specific keys. The new Siemens key O/o is
defined to use the short key which is sometimes used in R65 e.g. the key under the navi in the S65 model.
A command could look like.
• AT+CKPD=:O <cr>
• AT+CKPD=”:O”<cr>
• AT+CKPD=:o <cr>
• AT+CKPD=”:o”<cr>
The short key will normaly call the browser menue by default but this behavior can be changed by the user
5.7 Use of Siemens specific Key X/x