Specifications

AT command set for XX Siemens mobile phones and modems
__________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September.2004
21
Read command Response:
AT+WS46?
<n
>
OK/ERROR/+CME ERROR
Parameter:
<n
>
See Test command
Write command
AT+WS46=[<n>]
Response:
OK/ERROR/+CME ERROR
Parameter:
<n>
See Test command
2.3.2 Call control commands
This section provides the descriptions of commands related to call control.
AT+CEER
AT+CEER Query the reason for disconnection of last call
Test command Response:
AT+CEER=?
OK
Execute command Response:
AT+CEER
+CEER: <report
>
Parameter
<report
>
Reason for disconnection, reported as numbers. For detailed
information see section 5.3.
AT+CHUP
AT+CHUP
Hangup call
Test command
AT+CHUP=?
OK/ERROR/+CME ERROR
Execute command Response:
AT+CHUP
OK/ERROR
For more detailed information see [2].
AT+CR
AT+CR Service reporting control
Test command Response:
AT+CR=?
+CR: (list of supported <mode
>s)
OK/ERROR/+CME ERROR
Parameter:
<mode
> 0
disables reporting
1
enables reportingIf enabled, the intermediate result code
+CR: <serv> is returned from the TA to the TE before the
intermediate result code CONNECT is transmitted.
Read command Response:
AT+CR?
+CR: <mode
>
OK/ERROR/+CME ERROR
Parameter:
<mode
>
See Test command
Write command Response: