Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
24
<reas
>
See Test command
<mode
> 0
Deactivate
1
Activate
2
Query
3
Install
4
Delete
<num
>
Telephone number
<type
>
Type of telephone number
<class
> 1
Voice
2
Data
4
Fax
7
Voice, Data and FAX (default)
8
SMS
16
data circuit sync
32
data circuit async
64
dedicated packet access
128
dedicated PAD access
X
combination of some of the above classes, e.g. 255
regroups all classes and 5 regroups Voice and FAX
<time
> 1-30
Time, rounded to a multiple of five seconds
<status
> 0
Inactive
1
Active
AT+CCWA
AT+CCWA Call waiting
Test command Response:
AT+CCWA=?
+CCWA: (list of supported <n
>s)
OK/ERROR/+CME ERROR
Parameter:
<n
> 0
1
disable
enable
Read command Response:
AT+CCWA?
+CCWA: <n
>
OK/ERROR/+CME ERROR
Parameter:
<n>
See Test command
Write command
AT+CCWA=[<n>,[<mode>[,<class>]]]
Response:
If <mode
>=2 and command is successful
+CCWA: <status
>, <class1><CR><LF>+CCWA: ....]
OK/ERROR/+CME ERROR
Parameter:
<n
>
See Test command
<mode
> 0
Disable
1
Enable
2
Query Status
<num
>
Telephone number
<type
>
Type of telephone number
<class
> 1
Voice
2
Data