Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
30
2
CLIR suppression (not incognito)
Read command Response:
AT+CLIR? +CLIR: <n>, <m>
OK/ERROR/+CME ERROR
Parameter:
<n
>
See Test command
<m
>
0 CLIR not provisioned (not incognito)
1 CLIR provisioned in permanent mode (incognito)
2 Unknown
3 CLIR mode presentation temporarily restricted (next call
incognito)
4 CLIR mode presentation temporarily allowed (next call not
incognito)
Write command
AT+CLIR=[<n>]
Response
OK/ERROR/+CME ERROR
Parameter:
<n>
See Read command
AT+CNUM
AT+CNUM Read own numbers
Test command Response:
AT+CNUM=?
OK/ERROR/+CME ERROR
Execute command Response:
AT+CNUM
+CNUM: [<alpha
1>],<number1>,<type1>[<CR><LF>
+CNUM: [<alpha
2>],<number2>,<type2> [...]]
OK/ERROR/+CME ERROR
Parameter:
<alpha
x>
optional alphanumeric string associated with <number
x>; used
character set should be the one selected with AT+CSCS
command.
<number
x>
string type phone number of format specified by <typex>
<type
x>
type of address octet in integer format (see GSM 04.08 [8]
subclause 10.5.4.7)
AT+COLP
AT+COLP Connected Line Identification Presentation
Test command Response:
AT+COLP=?
+COLP: (list of supported <n
>s)
OK/ERROR/+CME ERROR
Parameter:
<n
>
0
Disable
1
Enable
Read command Response:
AT+COLP? +COLP: <n>, <m>
OK/ERROR/+CME ERROR
Parameter:
<n
>
See Test command
<m
>
0
COLP not provisioned (no presentation)
1
COLP provisioned