Specifications

AT command set for XX Siemens mobile phones and modems
__________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September.2004
31
2
Unknown
Write command
AT+COLP=[<n>]
Response.
OK/ERROR/+CME ERROR
Parameter:
<n
>
See Test command
Unsolicited message
+COLP: <num>,<type>,,,<alpha>
Parameter
<num>
Telephone number
<type
>
Type of telephone number
<alpha
>
String type alphanumeric representation of
<num><num><num><num><num><num><num><num><num>
AT+COPN
AT+COPN Read operator names
Test command Response:
AT+COPN=?
OK
Execute command Response:
AT+COPN
+COPN: numeric <oper
1>,long alphanumeric <oper1>[<CR><LF>
+COPN: numeric <oper
2>,long alphanumeric <oper2>][…]
OK/ERROR/+CME ERROR
Parameter:
<oper
x>
Network operator in numeric and alphanumeric notation see
AT^SPLM command
AT+COPS
AT+COPS Commands concerning selection of network operator
Test command Response:
AT+COPS=?
+COPS: [list of supported (<stat>,long alphanumeric
<oper>,,numeric <oper>)s][,,( list of supported,
<mode>s),(list of supported <format>s)]
OK/ERROR/+CME ERROR
Parameter:
<stat
> 0
Unknown
1
Useful network operator
2
Used network operator
3
Prohibited network operator
<oper
>
Operator in the format according to <mode
>
<mode> 0
Automatic mode
1
Manual selection of network operator
3
Setting of format
4
Automatic, selected manually
<format
> 0
Long alphanumeric
2
Numeric <oper
>
Note:
Output of long alphanumeric <oper
> is according to the settings defined using the AT+CSCS
command, i. e. either in GSM or in UCS2 character set.
Read command Response:
AT+COPS?
+COPS: <mode
>[,<format>,<oper]
OK/ERROR/+CME ERROR