Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
32
Parameter:
<mode
>
See Test command
<format
>
See Test command
<oper
>
Network operator
Note:
If <format
> is set to long alphanumeric (0) output of <oper> is according to the settings defined
using the AT+CSCS command, i. e. either in GSM or in UCS2 character set.
Write command
AT+COPS=<mode>[,<format>[,<oper>]]
Response:
OK/ERROR/+CME ERROR
Parameter:
<mode
>
See Test command
<format
>
See Test command
If <mode
> = 1, <format> can only be 2
<oper
>
In numeric form only
AT+CPOL
AT+CPOL Preferred operator list
Test command Response:
AT+CPOL=?
+CPOL: (list of supported <index
>s),(list of supported <format>s)
Parameter:
<index
>
order number of operator in the preferred-operator list of the SIM
<format
> 2
Numeric
Read command Response:
AT+CPOL?
+CPOL: <index
1>, <format>,<oper1>[<CR><LF>
+CPOL: <index
2>, <format>,<oper2>][…]
OK/ERROR/+CME ERROR
Parameter:
<index
x>
See Test command
<format
>
See Test command
Write command
AT+CPOL=[<index>][, <format>[,<oper>]]
Response:
OK/ERROR/+CME ERROR
Parameter:
<index
>
See Test command
<format>
See Test command
<oper
x>
Operator
AT+CPWD
AT+CPWD Change password to a lock
Test command Response:
AT+CPWD=?
+CPWD: list of supported (<fac
>, <pwdlength>)s
OK/ERROR/+CME ERROR
Parameter:
<fac
>
AB
All Barring services
AC
All incoming barring services