Specifications

AT command set for XX Siemens mobile phones and modems
__________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September.2004
43
<sto
>
See Test command
<used
>
integer type value indicating the number of used locations in
selected memory
<total
>
integer type value indicating the total number of locations in
selected memory
Write command
AT+CPBS=<sto>[,<passwd>]
Response:
OK/ERROR/+CME ERROR
Parameter:
<sto>
See Test command
<passwd> PIN2 only for selecting the FD-phonebook
AT+CPBW
AT+CPBW Write a telephone-book entry
Test command Response:
AT+CPBW=?
+CPBW: (list of supported <index
>s), <nlength>,(list of supported
<type
>s), <tlength>
OK/ERROR/+CME ERROR
Parameter:
<index
>
Location number
<nlength
>
Max. length of telephone number
<tlength
>
Max. length of text corresponding to the number
Write command
AT+CPBW=[<index>][,<nummer>[,<type>[,<text>]]]
Response
OK/ERROR/+CME ERROR
Parameter:
<index
>
Location number at which the entry is written
<nummer
>
Telephone number
<type
>
Type of number
<text
>
Text corresponding to the telephone number
The following characters in <text> must be entered via the
Siemens-specific escape sequence (see also
Appendix A: “How to use special characters in certain
commands ( e. g., AT+CPBW”)
<text
> depends on AT+CSCS.
GSM Char Hex char ASCII
3 byte Esc Seq
(hex)
Notes
Ö
x5C
\
x5C x35 x43 Backslash
"
x22 “ x5C x32 x32
String
delim
Ò
x08 BSP x5C x30 x38 Backspace
@
x00 NULL x5C x30 x30 GSM Null
GSM=0x00 may cause problems on application level when
using the function strlen() and should thus be represented
by an escape sequence
AT+CPIN
AT+CPIN Enter PIN and query lock
Test command Response: