Specifications

AT command set for XX Siemens mobile phones and modems
__________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September.2004
45
see AT+CSCS command
<ppu
>
price per unit; dot is used as a decimal separator (e.g.
“1.33”)
Write command
AT+CPUC=<currency>,<ppu>[,<passwd>]
Response:
OK/ERROR/+CME ERROR
Parameter:
<passwd
>
String type; usually PIN2
AT+CRMP
AT+CRMP Ring Melody Playback
Test command Response:
AT+CRMP=?
+CRMP: (list of supported <call type
>s),(list of supported <volume>s)
OK
Write command
+CRMP=<call type>[,<volume>]
Response:
+CRMP: <call type>[,<volume>]
OK/ERROR/+CME ERROR
Parameter:
<call type
>
integer type parameter corresponding to different ring
melodies in mobile such as line1, line2, groups, Alarm, SMS,
CBS and others
<volume
>
integer type parameter with manufacturer specific range
Note:
The Write command starts playing the ring melody.
Execute command Response:
AT+CRMP
OK/ERROR/+CME ERROR
Note:
The Execute command stops the melody played.
If an MTC is received during an active test ring, the test ring is switched off
and the ”normal” ring is switched on.
AT+CRSL
AT+CRSL Ringer sound level
Test command Response:
AT+CRSL=?
+CRSL: (list of supported <level
>s)
OK
Parameter:
<level>
Ringer Sound Level
Read command Response:
AT+CRSL?
+CRSL: <level
>
OK/ERROR/+CME ERROR
Write command
AT+CRSL=<level>
Response:
OK/ERROR/+CME ERROR
Parameter:
<level
>
See Test command
AT+CRSM
AT+CRSM Restricted SIM access