Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
54
1 streaming
2 interactive
3 background
<Maximum bitrate UL
>
a numeric parameter that indicates the
maximum number of kbits/s delivered to UMTS
(up-link traffic) at a SAP. As an example a
bitrate of 32kbit/s would be specified as '32'
0 network subscribed value
1..8640
kbit/s
<Maximum bitrate DL
>
Same as Maximum bitrate UL but for down
link
0 network subscribed value
1..8640
kbit/s
<Guaranteed bitrate UL
>
a numeric parameter that indicates the
guaranteed number of kbits/s delivered to
UMTS (up-link traffic) at a SAP (provided that
there is data to deliver). As an example a bitrate
of 32kbit/s would be specified as 32
0 network subscribed value
1..8640
kbit/s
<Guaranteed bitrate DL
>
a numeric parameter that indicates the
guaranteed number of kbits/s delivered to
UMTS (down-link traffic) at a SAP (provided
that there is data to deliver). As an example a
bitrate of 32kbit/s would be specified as 32
0 network subscribed value
1..8640
kbit/s
<Delivery order
>
a numeric parameter that indicates whether the
UMTS bearer shall provide in-sequence SDU
delivery or not
0
No
1
Yes
2
network subscribed value
<Maximum SDU size>
a numeric parameter (1,2,3,…) that indicates
the maximum allowed SDU size in octets
0
network subscribed value
1..1520
octets
<SDU error ratio>
a string parameter that indicates the target
value for the fraction of SDUs lost or detected
as erroneous. SDU error ratio is defined only for
conforming traffic. The value is specified as
'mEe'. For example, a target SDU error ratio of
5•10
-3
would be specified as 5E3
0E0
network subscribed value
1E1-1E6
Range of supported values
<Residual bit error
ratio>
a string parameter that indicates the target
value for the undetected bit error ratio in the
delivered SDUs. If no error detection is
requested, Residual bit error ratio indicates the
bit error ratio in the delivered SDUs. The value
is specified as 'mEe'.