Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
iv
1 General information
This document constitutes the manual reference to the AT command set supported by <master>
Siemens mobile phones.
1.2 Abbreviations and glossary
The following abbreviations and terms are used throughout this specification:
Abbreviation / Term Meaning
ALS Alternate Line Service
CSD Circuit Switched Data
CTS Clear to send
CUG Closed User Gruop
DCE Data Carrier Equipment
DSR Data Set Ready
DTE Data Terminal Equipment
DTR Data Terminal Ready
FDN Fixed dialling numbers
GPP Generation Partnership Project
IMEI Internatonal Mobile Station Equipment Identity
IMSI International Mobile Subscriber Identity
ME Mobile Equipment
PDU Protocol Data Unit
PIN Personal Identification Number
PPP Point-to-Point Protocol
PUK PIN Unblocking Key
RLP Radio Link Protocol
RTS Ready to send
SIM Subscriber Identity Module
SNDCP Subnetwork Dependency Convergence Protocol
SWIM Smart card that has both SIM and WIM applications
TA Terminal Adapter
TE Terminal Equipment
UDI Unrestricted Digital Information
WIM Wireless Identification Module
1.3 Notational Conventions
The following notational conventions apply throughout this manual:
Convention Meaning
Case sensitivity Although the names of commands are not case-sensitive, cases should not be
mixed. Either “AT” or “at” should be specified, but neither “aT” nor “At”.
Throughout this manual, “AT” is used
007 Leading zeroes in strings can be omitted
Letters and digits
Letters and digits in the Courier New font indicate parameter names and
values
abc
Underlined
parameter values indicate the recommended default setting of this