Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
58
a numeric parameter that indicates whether SDUs
detected as erroneous shall be delivered or not
0
No
1
Yes
2
no detect
3
network subscribed value
<Transfer delay
>
a numeric parameter (0,1,2,…) that indicates the
targeted time between request to transfer an SDU at
one SAP to its delivery at the other SAP, in
milliseconds
0
network subscribed value
1..4000
Milliseconds
<Traffic handling priority
>
a numeric parameter (1,2,3,…) that specifies the
relative importance for handling of all SDUs belonging
to the UMTS bearer compared to the SDUs of other
bearers
0
network subscribed value
1..3
Priority Level
Read command
AT+CGEQREQ?
Response
+CGEQREQ: <cid
>, (<Traffic class> , <Maximum bitrate UL>,
<Maximum bitrate DL
>, <Guaranteed bitrate UL>, <Guaranteed
bitrate DL> , <Delivery order> , <Maximum SDU size> , <SDU
error ratio> , <Residual bit error ratio> , <Delivery of
erroneous SDUs> , <Transfer delay> , <Traffic handling
priority>
[<CR><LF>+CGEQREQ: <cid
>, (<Traffic class> , <Maximum
bitrate UL>, <Maximum bitrate DL>, <Guaranteed bitrate UL>,
<Guaranteed bitrate DL
> , <Delivery order> , <Maximum SDU
size> , <SDU error ratio> , <Residual bit error ratio> ,
<Delivery of erroneous SDUs
> , <Transfer delay> , <Traffic
handling priority>
[…]]
OK/ERROR/+CME ERROR
Parameter:
<cid
>
numeric PDP Context Identifier
<Traffic class
>
See Test command
<Guaranteed bitrate UL
>
See Test command
<Maximum bitrate DL
>
See Test command
<Guaranteed bitrate UL
>
See Test command
<Guaranteed bitrate DL
>
See Test command
<Delivery order
>
See Test command
<Maximum SDU size
>
See Test command
<SDU error ratio
>
See Test command
<Residual bit error ratio
>
See Test command
<Delivery of erroneous SDUs
>
See Test command
<Transfer delay
>
See Test command
<Traffic handling priority
>
See Test command
Write command