Specifications

AT command set for XX Siemens mobile phones and modems
__________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September.2004
59
AT+CGEQREQ=[<cid> [,<Traffic class> [,<Guaranteed bitrate UL> [,<Maximum
bitrate DL> [,<Guaranteed bitrate UL> [,<Guaranteed bitrate DL>
[,<Delivery order
> [,<Maximum SDU size> [,<SDU error ratio> [,<Residual
bit error ratio> [,<Delivery of erroneous SDUs> [,<Transfer delay>
[,<Traffic handling priority
> ]]]]]]]]]]]]]
Response:
OK/ERROR/+CME ERROR
Parameter:
<cid
>
See Read command
<Traffic class
>
See Test command
<Guaranteed bitrate UL
>
See Test command
<Maximum bitrate DL
>
See Test command
<Guaranteed bitrate UL
>
See Test command
<Guaranteed bitrate DL
>
See Test command
<Delivery order
>
See Test command
<Maximum SDU size
>
See Test command
<SDU error ratio
>
See Test command
<Residual bit error ratio
>
See Test command
<Delivery of erroneous SDUs
>
See Test command
<Transfer delay
>
See Test command
<Traffic handling priority
>
See Test command
AT+CGEREP
AT+CGEREP GPRS event reporting
Test command Response:
AT+CGEREP=?
+CGEREP: (list of supported <mode
>s),(list of supported <bfr>s)
OK/ERROR/+CME ERROR
Parameter:
<mode
>
numeric parameter
0
buffer unsolicited result codes in the MT; if MT result code
buffer is full, the oldest ones can be discarded. No codes are
forwarded to the TE
1
discard unsolicited result codes when MT-TE link is reserved
(e.g. in on-line data mode); otherwise forward them directly
to the TE
2
buffer unsolicited result codes in the MT when MT-TE link is
reserved (e.g. in on-line data mode) and flush them to the
TE when MT-TE link becomes available; otherwise forward
them directly to the TE
<bfr
>
numeric parameter
0
MT buffer of unsolicited result codes defined within this
command is cleared when 1 or 2 is entered for <mode>
1
MT buffer of unsolicited result codes defined within this
command is flushed to the TE when 1 or 2 is entered for
<mode>
Read command Response:
AT+CGEREP?
+CGEREP: <mode
>,<bfr>
OK/ERROR/+CME ERROR
Parameter:
<mode
>
See Test command
<bfr
>
See Test command