Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
60
Write command
AT+CGEREP=[<mode
>[,<bfr>]]
Response
OK/ERROR/+CME ERROR
Parameter:
<mode
>
See Test command
<bfr
>
See Test command
Unsolicited result code:
+CGEV: REJECT <PDP_type>, <PDP_addr> context activation rejected
+CGEV: NW REACT <PDP_type>, <PDP_addr> context activation by ME
+CGEV: NW DEACT <PDP_type>, <PDP_addr> detached by network
+CGEV: ME DEACT <PDP_type>, <PDP_addr> context activation by ME
+CGEV: NW DETACH detached by network
+CGEV: ME DETACH detached by ME
+CGEV: NW CLASS <class> change of mobile class by network
+CGEV: ME CLASS <class> change of mobile class by ME
Parameter:
<PDP_type
>
The PDP context type.
Refer to AT+CGDCONT for details
<PDP_addr
>
The IP-address of the context
AT+CGQMIN
AT+CGQMIN Quality of Service Profile (Minimum acceptable)
Test command Response:
AT+CGQMIN=?
+CGQMIN: <PDP_type
>, (list of supported <precedence>s), (list of
supported <delay
>s), (list of supported <reliability>s) , (list of
supported <peak
>s), (list of supported <mean>s)[<CR><LF>
+CGQMIN: <PDP_type
>, (list of supported <precedence>s), (list of
supported <delay
>s), (list of supported <reliability>s) , (list of
supported <peak
>s), (list of supported <mean>s)[…]]
OK/ERROR/+CME ERROR
Parameter:
<PDP_type
>
string parameter of Packet Data Protocol type
PPP
Type PPP
IP
Type IP
<precedence
>
numeric parameter for the precedence class
0
network subscribed value
1 .. 3
<delay
>
numeric parameter for the delay class
0
network subscribed value
1 .. 4
<reliability
>
numeric parameter for the reliability class
0
network subscribed value
1..5
<peak
>
numeric parameter for the peak throughput class
0
network subscribed value
1 .. 7
<mean
>
numeric parameter for the mean throughput class
0 network subscribed value
1..12
Read command Response: