Specifications

AT command set for XX Siemens mobile phones and modems
__________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September.2004
65
AT+CGTFT=?
+CGTFT: <PDP_type
>list of supported <packet filter identifier>s),
(list of supported <evaluation precedence index
>s), (list of supported
<source address and subnet mask
>s), (list of supported <protocol
number (ipv4) / next header (ipv6)>s), (list of supported
<destination port range
>s), (list of supported <source port
range>s), (list of supported <ipsec security parameter index
(spi)>s), (list of supported <type of service (tos) (ipv4) and
mask / traffic class (ipv6) and mask>s), (list of supported <flow
label (ipv6)>s) [<CR><LF>
+CGTFT: <PDP_type
>, (list of supported <packet filter
identifier>s), (list of supported <evaluation precedence index>s),
(list of supported <source address and subnet mask
>s), (list of
supported protocol number (ipv4) / next header (ipv6)
>s), (list
of supported <destination port range
>s), (list of supported <source
port range>s), (list of supported <ipsec security parameter index
(spi)>s), (list of supported <type of service (tos) (ipv4) and
mask / traffic class (ipv6) and mask>s), (list of supported <flow
label (ipv6)>s) […]]
OK/ERROR/+CME ERROR
Parameter:
<PDP_type
>
string parameter of Packet Data Protocol type
PPP
Type PPP
IP
Type IP
IPV6
Type IP Version 6
<packet filter identifier
>
numeric parameter identifies the filter
1..8
<evaluation precedence index
>
Numeric parameter
0..255
<source address and subnet mask
>
Consists of dot-separated numeric (0-255) parameters
on the form 'a1.a2.a3.a4.m1.m2.m3.m4', for IPv4 and
'a1.a2.a3.a4.a5.a6.a7.a8.a9.a10.a11.a12.a13.a14.a15.
a16.
m1.m2.m3.m4.m5.m6.m7.m8.m9.m10.m11.m12.m13.m
14.m15.m16', for IPv6.
Where ‘ax’ is the IP address and ‘mx’ is the mask.
<protocol number (ipv4) / next header (ipv6)
>
Numeric parameter
0..255
<destination port range
>
Consists of dot-separated parameters of the form 'f.t'
(from …to).
0..65535
<source port range
>
Same as destination port range but source port
0..65535
<ipsec security parameter index (spi)
>
Hexadecimal parameter, value range from 00000000
to FFFFFFFF
0..FFFFFFFF
<type of service (tos) (ipv4) and mask / traffic class