Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
66
(ipv6) and mask>
Dot-separated numeric (0-255) parameters on the form
't.m'.
0..255
<flow label (ipv6)
>
Hexadecimal parameter, value range from 00000 to
FFFFF. Valid for IPv6 only
0
network subscribed value
Read command Response:
AT+CGTFT?
+CGTFT: <cid
>, <packet filter identifier>, <evaluation
precedence index>, <source address and subnet mask>,
<protocol number (ipv4) / next header (ipv6)
>,
<destination port range
>, <source port range>, <ipsec
security parameter index (spi)>, <type of service (tos)
(ipv4) and mask / traffic class (ipv6) and mask>, <flow
label (ipv6)>
[<CR><LF>+CGTFT: <cid
>, <packet filter identifier>,
<evaluation precedence index
>, <source address and subnet
mask>, <protocol number (ipv4) / next header (ipv6)>,
<destination port range
>, <source port range>, <ipsec
security parameter index (spi)>, <type of service (tos)
(ipv4) and mask / traffic class (ipv6) and mask>, <flow
label (ipv6)>, <flow label (ipv6)>
[…]]
OK/ERROR/+CME ERROR
Parameter:
<cid
>
numeric PDP Context
Identifier
<packet filter identifier
>
See Test command
<evaluation precedence index
>
See Test command
<source address and subnet mask
>
See Test command
<protocol number (ipv4) / next header
(ipv6)>
See Test command
<destination port range
>
See Test command
<source port range
>
See Test command
<ipsec security parameter index (spi)
>
See Test command
<type of service (tos) (ipv4) and mask /
traffic class (ipv6) and mask>
See Test command
<flow label (ipv6)
>
See Test command
Write command
AT+CGTFT=[<cid> [<packet filter identifier>, <evaluation precedence
index> [,<source address and subnet mask> [,<protocol number (ipv4) / next
header (ipv6)> [,<destination port range> [,<source port range> [,<ipsec
security parameter index (spi)> [,<type of service (tos) (ipv4) and mask /
traffic class (ipv6) and mask> [,<flow label (ipv6)> ]]]]]]]]]
Response:
OK/ERROR/+CME ERROR
Parameter:
<cid
>
See Read command
<packet filter identifier
>
See Test command
<evaluation precedence index
>
See Test command
<source address and subnet mask
>
See Test command
<protocol number (ipv4) / next header
(ipv6)>
See Test command