Specifications

AT command set for XX Siemens mobile phones and modems
__________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September.2004
67
<destination port range
>
See Test command
<source port range
>
See Test command
<ipsec security parameter index (spi)
>
See Test command
<type of service (tos) (ipv4) and mask /
traffic class (ipv6) and mask>
See Test command
<flow label (ipv6)
>
See Test command
2.3.7 Commands related to mobile equipment errors
AT+CMEE
AT+CMEE Expanded error messages according to 3GPP TS 27.007
Test command Response:
AT+CMEE=?
+CMEE: (list of supported <n
>s)
Parameter:
<n
>
0 Suppresses the expanded error format
1 Expanded error messages as number
2 Expanded error messages as text
Read command Response:
AT+CMEE?
+CMEE: <n
>
Parameter:
<n
>
See Read command
Write command Response:
AT+CMEE=<n>
OK/ERROR/+CME ERROR
Parameter:
<n
>
Description:
For detailed information on the values possible for +CME ERROR see section
5.1.
+CMS errors have been defined for SMS; for detailed information on the
values possible for +CMS ERROR see section 5.2.
2.3.8 TIA IS-101 commands (“Voice control interim standard for asynchronous DCE”)
This section provides the descriptions of other AT commands.
AT+VTD
AT+VTD Set duration of a DTMF tone
Test command Response:
AT+VTD=?
<duration
>
OK/ERROR/+CME ERROR
Parameter:
<duration
>
Duration of tone (in tenths of seconds)
1 .. 255
Read command Response:
AT+VTD?
<duration
>
OK/ERROR/+CME ERROR
Write command
AT+VTD=<duration>