Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
74
unsolicited result code:
+CDS: <length><CR><LF><pdu> (PDU mode enabled)
2
If SMS-STATUS-REPORT is routed into ME/TA, indication
of the memory location is routed to the TE using unsolicited
result code:
+CDSI: <mem>,<index>
<bfr
> 1
TA buffer of unsolicited result codes defined within this
command is cleared when <mode
> 1...3 is entered.
<mem
>
See AT+CPMS command
<index
>
Index of the record on the chip card
<length
>
Length of <pdu>
<pdu
>
See AT+CMGL command
Read command Response :
AT+CNMI?
+CNMI: <mode
>,<mt>,<bm>,<ds>,<bfr>
Parameter:
<mode
>
See Test command
<mt
>
See Test command
<bm
>
See Test command
<ds
>
See Test command
<bfr
>
See Test command
Write command
AT+CNMI=[<mode>[,<mt>[,<bm>[,<ds>[,<bfr>]]]]]
Response:
OK/ERROR/+CMS ERROR
Parameter:
<mode
>
See Test command
<mt
>
See Test command
<bm
>
See Test command
<ds
>
See Test command
<bfr
>
See Test command
Unsolicited result code
+CMTI: <mem>,<index>
+CMT: <length><CR><LF<>pdu>
+CDS: <length><CR><LF><pdu>
+CDSI: <mem>,<index>
+CBM: <length><CR><LF><pdu>
AT+CPMS
AT+CPMS Preferred SMS message storage
Revision according to 3GPP TS 27.005
Test command Response:
AT+CPMS=?
+CPMS: (list of supported <mem1
>s),( list of supported <mem2>s) ,(list of
supported <mem3
>s)
Parameter:
<mem1
>
Memory from which messages are read and deleted
SM
SIM message storage
ME
Mobile Equipment message storage
MT
combination of "ME" and "SM" storages
<mem2
>
Messages will be written and sent from this memory storage:
SM
SIM message storage
ME
Mobile Equipment message storage