Specifications

ManualsBrandsCME ManualsMusic PedalGPP-3

AT command set for XX Siemens mobile phones and modems

_________________________________________________________________________________________

Document No.: A30880-A10-A001-XX-

D376

Revision: Master R75

Revision Date: 29. September, 2004

[9] GSM 04.11: "Digital cellular telecommunication system (Phase 2+); Point-to-Point (PP) Short

Message Service (SMS) support on mobile radio interface".

[10] GSM 05.08: "Digital cellular telecommunication system (Phase 2+); Radio subsystem link control".

[11] GSM 11.11: Digital cellular telecommunications system (Phase 2+); Specification of the Subscriber

Identity Module - Mobile Equipment (SIM-ME)

[12]

[13] 3GPP TS 24.008: "3rd Generation Partnership Project; Mobile Radio Interface Layer 3

specification; Core Network Protocols-Stage 3".

[14] 3GPP TS27.005: "Digital cellular telecommunication system (Phase 2+); Radio transmission and

reception".

[15] 3GPP S 27.007: "Digital cellular telecommunications system (Phase 2+);AT command set for GSM

Mobile Equipment (ME)

[16] ITU-T Draft new Recommendation V.250 “Serial asynchronous automatic dialling and control”

[17] ITU-T Recommendation T.31: "Asynchronous facsimile DCE control, service class 1"

[18] ITU-T Recommendation T.32: "Asynchronous facsimile DCE control, service class 2"

[19] Hands-free Profile Adopted Version 1.0, 2003-04-29, by Bluetooth SIG Car Working Group; Doc

no. CAR_x_SPEC/V1.0)

[20] TR29.2: Standards Proposal No. 2388, Proposed New Standard “Asynchronous Facsimile DCE

Control Standard” (if approved, to be published as EIA/TIA-592), October 1990

[21] V29: 9600 bits per second modem standardized for use on point-to-point 4-wire leased telephone-

type circuits

[22] ITU-T Draft new Recommendation V27ter: 4800/2400 bits per second modem standardized for use

in the general switched telephone network

2 Software interface

2.1 Overview of the supported AT command set

This section provides overviews of the supported sets of AT commands, separate for each type of command set.

Table 2-1 lists all the supported 3GPP TS 27.007 AT commands in alphabetical order, and indicates the type of

command as defined in the 3GPP TS 27.007 standard:

27.007

command

Function Type of command Page

AT+CACM Accumulated call meter Mobile equipment

control

AT+CALM Alert sound mode Mobile equipment

control

AT+CAMM Accumulated call meter maximum Mobile equipment

control

AT+CAOC Advice of charge Network service 23

AT+CBC

Battery charge

Mobile equipment

control

AT+CBST Select bearer service type Modem command 76

AT+CCFC Call forwarding number and conditions Network service 23

AT+CCLK Clock Mobile equipment

control

AT+CCWA Call waiting Network service 24