Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
80
AT+FBOR?
OK/ERROR/+CME ERROR
Parameter:
<bor> OK
Write command
AT+FBOR=<bor>
Response:
OK/ERROR
Parameter:
<bor> OK
AT+FCIG
AT+FCIG Query or set the Local polling id
Used for FAX class 2 only
Test command Response:
AT+FCIG=?
+FCIG: (max. length of Local Polling ID string) (range of
supported ASCII character values)
OK/ERROR/+CME ERROR
Parameter:
<id>
Local Polling ID string, maximum length and possible content as
reported by Test command.
Default value is empty string (“”).
Maximum length: 20
See also the “AT+FLID” command
Read command Response:
AT+FCIG?
<id> OK
Parameter:
<id>
See Test command
Write command Parameter:
AT+FCIG=<id>
<id>
See Test command
AT+FCQ
AT+FCQ Control Copy Quality
Used for FAX class 2 only
This command controls Copy Quality checking when receiving a fax
Test command Response:
AT+FCQ=?
+FCQ: (list of supported copy quality checking <cq>s)
OK
Parameter:
<cq>
0 No checking of copy quality performed. The ME will generate
Copy Quality OK (MCF) responses to complete pages
1 ME can check 1-D phase data. The connected application
must check copy quality for 2-D phase C data
Read command Response:
AT+FCQ?
<cq> OK
Parameter:
<cq>
See Test command
Write command Parameter: