Specifications

AT command set for XX Siemens mobile phones and modems
__________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September.2004
83
<df>
See Test Command
AT+FDIS
AT+FDIS
Query or set session parameters
Used for FAX class 2 only
This command allows the controlling application to set and constrain the capabilities used for the
current session. +FDIS is used to generate DIS or DTC messages directly. +FDIS (and received
DIS messages) is also used to generate DCS messages.
Test command Response
AT+FDIS=?
+FDIS: (list of <VR>s), (list of <BR>s), (list of <WD>s), (list of <LN>s), (list of
<DF>s), (list of <EC>s), (list of <BF>s), (list of <ST>s)
Parameter:
vr
Vertical Resolution
0
normal, 98 lpi
1
fine, 196 lpi
br
Bit rate
0
2400 bit/s, V.27ter
1 4800 bit/s, V.27ter
2 7200 bit/s, V.29
3 9600 bit/s, V.29
wd
Page Width
0
*
)
1728 pixels in 215mm
1 2048 pixels in 255 mm
2 2432 pixels in 303 mm
3 1216 pixels in 151 mm
4 864 pixels in 107 mm
ln
Page length
0 A4, 297mm
1 B4, 364mm
2 unlimited length
df
Data compression Format
0
*
)
1-D modified Huffman
1 2-D modified read
2 2-D uncompressed mode
ec
Error Correction mode
0
*
)
disable ECM
1 enable ECM, 64 bytes/frame
2 enable ECM, 256 bytes/frame
bf
Binary Fole transfer mode
0
*
)
disable BFT
1
enable BFT
st
Scan Time / line
0
*
)
0 ms (at vr= normal)
1
5 ms
2
10 ms
3
10 ms
4
20 ms
5
20 ms