Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
86
vr
Vertical Resolution
0
normal, 98 lpi
1
fine, 196 lpi
wd
Page Width
0
*
)
1728 pixels in 215mm
1 2048 pixels in 255 mm
2 2432 pixels in 303 mm
3 1216 pixels in 151 mm
4 864 pixels in 107 mm
ln
Page length
0 A4, 297mm
1 B4, 364mm
2 unlimited length
*) Note:
Only the default value needs to be implemented.
Use test command to check which parameter values are in fact possible!
AT+FET
AT+FET
End a page or document
Used for FAX class 2 only
This command indicates that the current page or part thereof is complete. An ERROR response
code results if this command is issued while the mode is on-hook.
Write command
AT+FET=<ppm>
Response:
OK/ERROR
Parameter:
<ppm>
Post Page Message Codes
0
Another page next, same document
1
another document next
2
no more pages or documents
4
another page, procedure interrupt
5
another document, procedure interrupt
AT+FK
AT+FK Kill operation, orderly FAX abort
Used for FAX class 2 only
This command causes the TA to terminate the session in an orderly manner.
Execute command Response:
AT+FK
OK/ERROR
AT+FLID
AT+FLID
Query or set session parameters
Used for FAX class 2 only
Test command Response:
AT+FLID=?
+FLID: (max. character length of Local ID string) (range of supported ASCII
character values)
OK/ERROR/+CME ERROR