Specifications

AT command set for XX Siemens mobile phones and modems
__________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September.2004
95
Note:
Unsolicited Result Code, only available if Data Transfer Mode enabled (i. e. <mode> = 1 or <mode>=2
previously entered in Write command
AT^SACM
AT^SACM Output ACM (accumulated call meter) and ACMmax
Test command Response:
AT^SACM=?
^SACM: (list of supported <n
>s)
Execute command Response:
AT^SACM
^SACM: <n
>,<acm>,<acm_max>
OK/ERROR/+CME ERROR
Parameter:
<n
>
See Write command
<acm
>
Accumulated call meter
<acm_max
>
Maximum accumulated call meter
Write command Parameter:
Specifies whether the unsolicited redsult code is to be displayed
AT^SACM=<n> <n>
0
Suppresses the Unsolicited result code specified
1
Displays the Unsolicited result code specified
Unsolicited result code Parameter:
^SACM: <m> <m> 1
ACM limit almost reached
2
ACM greater than ACMmax
3
ACM range overflow
AT^SADT
AT^SADT Application Data Transfer
Test command Response:
AT^SADT=?
^SADT: (list of supported <application
>s),(list of
supported <bitrate
>s)
OK/ERROR
Parameter:
<application
>
integer parameter which identifies the applications
0
OMA (not supported)
1
CoC (Clip on Camera) application
<bitrate>
bits per second at which the DTE-DCE interface should
operate.
Write command
AT^SADT=<application>[,<bitrate>[,<filename>[,<filesize>]]]
Response:
CONNECT/ERROR
Parameter:
<application>
see Test command
<bitrate
>
see Test command
<filename
>
string containing the name of the file with extension (not
supported)
<filesize
>
string containing the size of the file in bytes (not supported)
AT^SBLK
AT^SBLK Clear black list
Test command Response: