User`s manual

11
3.2 Pedal Outs
z Please use cables, with the right connectors, as below:
Pedal out port Pedal type Connector type
PEDAL 1 Switch TS
PEDAL 2 Switch TS
PEDAL 3 Continuous TRS
3.3 MIDI OUT
z Please connect the MIDI OUT port to the MIDI IN port of another MIDI device.
z Power supply via USB or AC adaptor is necessary when using MIDI OUT port.
z Each time when a pedal is depressed, the corresponded LED will flash.
z Please do not use a MIDI cable which is more than 5 meters long to avoid data
delay or loss.
z By default, the product will send following MIDI messages from the MIDI OUT
port:
Pedal Controller # Controller type
PEDAL 1 CC#67 Pedal (soft)
PEDAL 2 CC#66 Pedal (sostenuto)
PEDAL 3 CC#64 Pedal (sustain)
3.4 USB Out
z When the USB connection is made, the power can be supplied via USB only.
z This product is Windows XP/MAC OS X USB MIDI class-compliant.
z Each time when a pedal is depressed, the corresponded LED will flash.
z By default, the product will send following MIDI messages from the USB port:
Pedal Controller # Controller type
PEDAL 1 CC#67 Pedal (soft)
PEDAL 2 CC#66 Pedal (sostenuto)
PEDAL 3 CC#64 Pedal (sustain)
3.5 Reset
z To reset the product, please depress all the three pedals, then power on the