Use and Care Manual

13 / 16
Note 1: After the BLE role is set as “Force Peripheral”, the setting will be
automatically saved in the WIDI Bud Pro.
Note 2: Click the WIDI Bud Pro device name to be renamed. The new name will
be effective once restarted.
4. Repeat the above steps to set all WIDIs to be added to the group.
5. After all WIDIs are set to the “Force Peripheral” role, they can be
powered on at the same time.
6. Click the "Group" menu, and then click "Create New Group" (or [+]
icon on Android).
7. Enter the name of the group.
8. Drag and drop the WIDI products to the central and peripheral
positions.
9. Click "Download Group". The setting will be saved in all WIDI
products. From here on, these WIDIs will be restarted and
automatically connect as the same group by default.
Note 1: Even if you power off the WIDI products, all the group setting status will
still be remembered. When you power them on again, they will be
automatically connected in the same group.
Note 2: If you want to forget the group connection settings, please use the
WIDI App to connect to the WIDI with "Central" role and click "Reset Default
Connections". Again, only power on this central device to allow the pairing with
WIDI App. If you power on multiple group devices, they will automatically
connect as a group. This will make it impossible for the WIDI App to make to
connection as they will already be occupied.
⚫ Group Auto-learn