Use and Care Manual

13 / 20
3. Please use the WIDI App to upgrade the Bluetooth firmware of the
WIDI device to v0.1.3.7 or later (for upgrade steps, please refer to the
relevant instructions and videos on BluetoothMIDI.com). At the same
time, please set the upgraded WIDI BLE role to "Forced Peripheral" to
avoid automatic connection when multiple WIDIs are used at the
same time. If necessary, you can rename each WIDI after the
upgrade, so that you can distinguish between different WIDI devices
when you use them at the same time.
4. Please make sure that the Windows 10 and the Bluetooth driver of
your computer has been upgraded to the latest version (the
computer needs to be equipped with Bluetooth 4.0/5.0 capability).
5. Plug a WIDI into the MIDI device, turn on the power to start the WIDI.
Click "Start" - "Settings" - "Devices" on Windows 10, open the
"Bluetooth and other devices" window, turn on the Bluetooth switch,
and click "Add Bluetooth or other devices".
6. After entering the Add Device window, click "Bluetooth", click the
WIDI device name listed in the device list, and then click "Connect".
7. If you see "Your device is ready to go", please click "Done" to close
the window (after connecting, you can see WIDI in the Bluetooth list
of the device manager).
8. Please follow steps 5 to 7 to connect other WIDI devices to Windows
10.
9. Open the music software, in the MIDI settings window, you should be
able to see the WIDI device name appearing in the list (Korg BLE
MIDI driver will automatically detect the WIDI Bluetooth connection
and associate it with the music software). Just select the desired
WIDI as the MIDI input and output device.