Use and Care Manual

17 / 20
Note 2: If you want to forget the group connection settings, please use the
WIDI App to connect to the WIDI with "Central" role and click "Reset Default
Connections". Again, only power on this central device to allow the pairing with
WIDI App. If you power on multiple group devices they will automatically
connect as a group. This will make it impossible for the WIDI App to make to
connection as they will already be occupied.
⚫ Group Auto-learn
WIDI Master supports Group Auto-learn from Bluetooth firmware version
v0.1.6.6. Enable “Group Auto Learn” for the WIDI Central device to
automatically scan for all available BLE MIDI devices (including WIDI and other
brands).
Video instruction: https://youtu.be/tvGNiZVvwbQ
1. Set all WIDI devices to “Forced Peripheral” to avoid auto-pairing
between WIDI devices.
2. Enable “Group Auto Learn” for the central WIDI device. Close WIDI
app. WIDI LED will flash blue slowly.
3. Turn on up to 4 BLE MIDI peripherals (including WIDI) for automatic
pairing with the WIDI Central device.
4. When everything is connected, press the button on the WIDI Central
device to store the group in its memory. The WIDI LED is green when
pressed and turns turquoise when released.
Note: iOS, Windows 10 and Android are not eligible for WIDI groups. For
macOS, click "Advertise" in MIDI Studio's Bluetooth configuration.