Installation Guide

Sprayer
Sprayer.
16
17
24
27
20
21
22
1
A. B. C.
Warning:
The supply valves and
supply lines are not
included, please
purchase them in
plumbshop.
1.Position faucet on countertop.
2.From underneath the countertop,assemble plastic base (NOTE:applicable
when the faucet is installed in sink),clamp and locknut and screw .
Tighten the locknut by hand and secure the screws with screwdriver.
3.Connect pull-out hose to quick connect assembly .
CAUTION:Make sure hose is properly engaged and secure in quick connect
assembly.
4.Fix the weight to the pull-out hose .
5.Connect supply lines to water supply valve.(supply valves and supply lines
are not included,please purchase them in local plumbing shops).
CAUTION: DON'T OVER TIGHTEN THE SUPPLY LINES.OTHERWISE IT MIGHT DAMAGE
THE WASHERS AND NUTS OF SUPPLY LINES AND CAUSE LEAK.
6.Remove spray from faucet and flush water through faucet to remove
any line trash.
7.Replace spray and run water through faucet for checking leaks at all
connections.
27
20
21
22
17
16
24
17
1
1