Installation Guide

Two Handle High ARC Kitchen Faucet

With Side Spray

4 8

Model No. : 191-7703 Polished Chrome

191-7704 Brushed Nickel

191-7705 Oil-Rubbed Bronze

Revised 4/28/16

In the event that Freendo faucets are used in a Commercial Application, this warranty is limited for

a period of 5 years, unless otherwise specifically stated in the catalog and/or price book.

PAGE 1
Model No. : 191-7703 191-7704 191-7705 Polished Chrome Brushed Nickel Oil-Rubbed Bronze In the event that Freendo faucets are used in a Commercial Application, this warranty is limited for a period of 5 years, unless otherwise specifically stated in the catalog and/or price book.
PAGE 2
6 Side Spray 25 Spray Gasket 24 23 Plastic Locknut Allen Key 22 Plastic Locknut 21 Washer 20 Putty Plate 19 Brazed Underbody 18 Aerator Collar 17 Aerator Core 16 Washer 15 Deck Plate 14 Diverter O-ring 13 12 Wearing Ring 11 Protective Sleeve 10 Hub Nut Spout 9 8 7 6 Cartridge (Cold water) 5 Cartridge Locknut 4 Index(Red) 3 Index(Blue) 2 Set Screw 1 Screwdriver Plastic Washer Cartridge(Hot water) No.
PAGE 3
Faucet Installation 26 16 17 18 9 25 24 4 1 2 10 11 12 5 13 7 8 14 3 15 20 6 19 15 21 22 27 23 20 21 22 1. Position the faucet, deck plate 15 and putty plate 20 on countertop as shown.Put the washer 21 and plastic locknut 22 to tailpiece of faucet and tighten the plastic locknut by hand.
PAGE 4
Shower Installation 26 25 27 24 2. Slide the spray hose through the hole as shown. Fix the side spray 26 by tightening the plastic locknut 24 .Place some plumber putty underside the spray gasket 25 if necessary. 3. Connect the spray hose to the quick connect assembly 27 . CAUTION：MAKE SURE THAT THE SPRAY HOSE IS PROPERLY ENGAGED AND SECURED TO QUICK CONNECT ASSEMBLY. Warning: The supply valves and supply lines are not included.