Installation Guide

Model No. : 191-7716 Polished Chrome

191-7717 Brushed Nickel

191-7718 Oil-Rubbed Bronze

Single Handle Pull-Down Kitchen Faucet

3 Hole or Single Hole Installation

Revised 4/28/16

In the event that Freendo faucets are used in a Commercial Application, this warranty is limited for

a period of 5 years, unless otherwise specifically stated in the catalog and/or price book.

PAGE 1
Model No. : 191-7716 191-7717 191-7718 Polished Chrome Brushed Nickel Oil-Rubbed Bronze In the event that Freendo faucets are used in a Commercial Application, this warranty is limited for a period of 5 years, unless otherwise specifically stated in the catalog and/or price book.
PAGE 2
Plumber's Putty Screwdriver 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 No.
PAGE 3
Install With Deck Plate 4 5 6 3 1 7 2 1 8 9 10 28 11 13 27 12 31 30 14 23 24 25 30 15 16 17 18 31 28 27 21 22 25 26 29 19 20 23 24 20 26 1. Assemble deck plate 28 and putty plate 27 to faucet. 2. Position faucet on countertop. 3. From underneath of the countertop,assemble plastic base 30 (NOTE: applicable when the faucet is installed in sink), clamp 23 and locknut 24 and screw 25 .Tighten the locknut by hand and secure the screws with screwdriver. 4.
PAGE 4
Install Without Deck Plate A. B. C. Warning: The supply valves and supply lines are not included. 1 30 23 24 25 31 20 26 1. Position faucet on countertop. 2. From underneath of the countertop,assemble plastic base 30 (NOTE: applicable when the faucet is installed in sink) clamp 23 and locknut 24 and screw 25 .Tighten the locknut by hand and secure the screws with screwdriver. 3. Connect pull-out hose 20 to quick connect assembly 31 .