Installation Guide

3
24
4
5
6
7
8
9
10
11
12
27
28
26
25
14
15
16
17
18
19
20
5
21
22
2
1
23
13
Install With Deck Plate
1. Assemble deck plate and putty plate to faucet.
2. Position faucet on countertop.
3. From underneath of the countertop,assemble plastic base (NOTE:
applicable when the faucet is installed in sink), clamp and locknut and
screw .Tighten the locknut by hand and secure the screws with screwdriver.
4. Fix the weight to the pull-out hose .
5. Connect pull-out hose to quick connect assembly .
CAUTION:Make sure hose is properly engaged and secure in quick connect
assembly.
6. Connect supply lines to water supply valve.(supply valves and supply lines
are not included,please purchase them in local plumbing shops).
CAUTION: DON'T OVER TIGHTEN THE SUPPLY LINES.OTHERWISE IT MIGHT DAMAGE
THE WASHERS AND NUTS OF SUPPLY LINES AND CAUSE LEAK.
7. Remove spray from faucet and flush water through faucet to remove
any line trash.
8. Replace spray and run water through faucet for checking leaks at all
connections.
27
28
26
16
15
14
22
13
25
22
23
23
13
22
25
28
27
26
16
15
14
23