Installation Guide

ManualsBrandsCMI ManualsKitchenCardania Polished Chrome 1-Handle Deck Mount Pull-Down Handle Kitchen Faucet (Deck Plate Included)

Model No. : 192-6413 Polished Chrome

192-6414 Brushed Nickel

192-6415 Oil-Rubbed Bronze

Cardania Handle High Arc Pull-Down

Kitchen Faucet

3 Hole or Single Hole Installation

Revised 5/2/17

In the event that Freendo faucets are used in a Commercial Application, this warranty is limited for

a period of 5 years, unless otherwise specifically stated in the catalog and/or price book.

repair. Compass Manufacturing International will, at its discretion, provide new or equivalent replacement

parts for any product that proves to be defective under normal usage and service.

Summary of content (4 pages)

PAGE 1
Model No. : 192-6413 192-6414 192-6415 Polished Chrome Brushed Nickel Oil-Rubbed Bronze In the event that Freendo faucets are used in a Commercial Application, this warranty is limited for a period of 5 years, unless otherwise specifically stated in the catalog and/or price book. repair. Compass Manufacturing International will, at its discretion, provide new or equivalent replacement parts for any product that proves to be defective under normal usage and service.
PAGE 2
31 30 Allen Key Weight 29 Under-plate Seal 28 Under-plate 27 Deck Plate 26 25 Screw Locknut 24 Clamp 23 Protective Sleeve Shank 22 21 20 Plumber's Putty and/or Silicone Screwdriver Quick Connect Assembly Stop Valve 19 Assembly 18 17 O-ring Cartridge Base 16 Cartridge 15 Cartridge Locknut 14 Trim Cap 13 12 Set Screw Index 11 Handle 10 Body 9 Retainer 8 Connector 7 O-ring 6 Ring 5 Spray 4 3 Pull-out Hose Ring 2 Hose Guide 1 Spout No.
PAGE 3
1 2 3 6 7 4 8 9 10 5 5 11 12 13 14 27 28 18 17 29 15 16 24 25 26 19 27 28 29 20 21 30 22 31 23 24 25 26 21 4 30 1. Assemble deck plate 27 , under-plate 28 and under-plate seal 29 to faucet. 2. Position faucet on countertop. 3. From underneath the countertop, assemble clamp 24 and locknut 25 and screw 26 . Tighten the locknut by hand and secure the screws with the screwdriver. 4. Connect pull-out hose 4 to quick connect assembly 21 .
PAGE 4
A. C. Warning: The supply valves and supply lines are not included. 5 24 25 26 B. 21 4 30 1. Position faucet on countertop. 2. From underneath the countertop, assemble clamp 24 and locknut 25 and screw 26 . Tighten the locknut by hand and secure the screws with the screwdriver. 3. Connect pull-out hose 4 to quick connect assembly 21 . CAUTION: Make sure hose is properly engaged and secure in quick connect assembly. 4. Fix the weight 30 to the pull-out hose 4 . 5.