Installation Guide

1. Assemble deck plate , under-plate and under-plate seal to faucet.

2. Position faucet on countertop.

3. From underneath the countertop, assemble clamp and locknut and

screw . Tighten the locknut by hand and secure the screws with the

screwdriver.

4. Connect pull-out hose to quick connect assembly .

CAUTION: Make sure hose is properly engaged and secure in quick connect

assembly.

5. Fix the weight to the pull-out hose .

6. Connect supply lines to water supply valve. (supply valves and supply lines

are not included).

CAUTION: DON'T OVER TIGHTEN THE SUPPLY LINES. OTHERWISE IT MAY DAMAGE

THE WASHERS AND NUTS OF THE SUPPLY LINES AND THIS COULD CAUSE THEM

TO LEAK.

7. Remove spray from faucet and flush water through faucet to remove

any debris.

8. Replace spray and run water through the faucet to check for leaks at

all of the connections.